[schriss]

Pictures would be nice
I'm interested in taking a look at the back of keypad to see if anything can be done to make "T" key work when pressed normally (it works only if I press its upper-right corner, like something was misalligned underneath)

Also, my rubber grommet that holds the stylus fell out, I'd like to see where is it's place.

This post has been edited by schriss: 30 January 2007 - 02:08 PM

[Sponsored Links]

[The Doctor]

schriss, on Jan 30 2007, 14:02, said:

Pictures would be nice
I'm interested in taking a look at the back of keypad to see if anything can be done to make "T" key work when pressed normally (it works only if I press its upper-right corner, like something was misalligned underneath)

Also, my rubber grommet that holds the stylus fell out, I'd like to see where is it's place.

Pictures WILL be coming SOON!

Unfortunately, i've been rather busy balancing college/exams/work/modaco/karate/sea cadets/sleep so i haven't found the time to take my hermes apart again (its a good 40 min (1 hour with photo's etc) work to disassemble/reassemble)

Will hopefully post tomorrow providing i can find a half decent camera (probably will be my c550 otherwise)

Phil

[Tommy Squeaker]

Thanks for this, just put it into action, broke my screen earlier, just took it to bits to see what its like and put it back together. Just need to find a new screen now,lol.

Worst thing is as well, i have the alignment problems, ive put it off and off, cos i know t mobile would just swap it, cant now tho, cos ive voided it


Edit

Saying that on the final touches of putting it back together, im left with a part, oooops lol, it just popped out when i was moving stuff, didnt see where it came from and no idea where it goes, so if you could point me in the right direction,

the part is a small black rectangle, with 2 running either underneath or on top, one end of the rectangle is a small metal piece, a semi circle in shape, doesnt look like its broken off. So any idea or tip on where that goes would be great.

Thanks

This post has been edited by Tommy Squeaker: 02 February 2007 - 12:23 AM

[The Doctor]

Tommy Squeaker, on Feb 2 2007, 00:13, said:

Thanks for this, just put it into action, broke my screen earlier, just took it to bits to see what its like and put it back together. Just need to find a new screen now,lol.

Worst thing is as well, i have the alignment problems, ive put it off and off, cos i know t mobile would just swap it, cant now tho, cos ive voided it

They wouldnt replace a broken screen under warranty anyway..

Tommy Squeaker, on Feb 2 2007, 00:13, said:

Saying that on the final touches of putting it back together, im left with a part, oooops lol, it just popped out when i was moving stuff, didnt see where it came from and no idea where it goes, so if you could point me in the right direction,

the part is a small black rectangle, with 2 running either underneath or on top, one end of the rectangle is a small metal piece, a semi circle in shape, doesnt look like its broken off. So any idea or tip on where that goes would be great.

The only small black rectangle i can think of is the rubber microphone covering

Any chance you could take a photo? Might recognise it then, if not i'll take my hermes apart and find it myself and take some photos for the guide in the process.

I get this problem alot with laptops... I can strip and reassemble phones/smartphones/ppc's with hardly any trouble. When i do it with a laptop, i get a pile of 'optional bits' at the end Its mostly screws and small bits like that

Phil

[Tommy Squeaker]

The Doctor, on Feb 2 2007, 02:55, said:

They wouldnt replace a broken screen under warranty anyway..
The only small black rectangle i can think of is the rubber microphone covering

Any chance you could take a photo? Might recognise it then, if not i'll take my hermes apart and find it myself and take some photos for the guide in the process.

I get this problem alot with laptops... I can strip and reassemble phones/smartphones/ppc's with hardly any trouble. When i do it with a laptop, i get a pile of 'optional bits' at the end Its mostly screws and small bits like that

Phil

Yeah will do thanks.


Warranty was meant to get rid of the mis alignment issues.


Anyone know where i can get a screen from????????????????

[The Doctor]

Tommy Squeaker, on Feb 2 2007, 07:26, said:

Yeah will do thanks.
Warranty was meant to get rid of the mis alignment issues.
Anyone know where i can get a screen from????????????????

A guy called wellcomchina on ebay had some 2.8" QVGA ppc screens not so long ago, none atm however

http://feedback.ebay.co.uk/ws/eBayISAPI.dl...id=wellcomchina

Phil

[Tommy Squeaker]

The Doctor, on Feb 2 2007, 14:43, said:

A guy called wellcomchina on ebay had some 2.8" QVGA ppc screens not so long ago, none atm however

http://feedback.ebay.co.uk/ws/eBayISAPI.dl...id=wellcomchina

Phil

Its ok, ive gone for the easy option and its going to HTC repairs on Monday.

Ive got pictures of the unidentified part, not sure how to post them tho, may have to email them to you if i can?

Also, obviously my phone is going in to be repaired, my screen is broken so i cant see anything, but ive got a few risque text messages id like to keep personal is there anyway of removing them from the phone, or wont they be there without my sim? Will a hard reset do it? How do i do a hard reset as i cant see what the screen says and what sounds do you get on a hard reset?

Again thanks

[The Doctor]

Tommy Squeaker, on Feb 2 2007, 23:42, said:

Its ok, ive gone for the easy option and its going to HTC repairs on Monday.

Ive got pictures of the unidentified part, not sure how to post them tho, may have to email them to you if i can?

Also, obviously my phone is going in to be repaired, my screen is broken so i cant see anything, but ive got a few risque text messages id like to keep personal is there anyway of removing them from the phone, or wont they be there without my sim? Will a hard reset do it? How do i do a hard reset as i cant see what the screen says and what sounds do you get on a hard reset?

Again thanks

You could just attach them to the post here, or my email is phil*DOT*martin*AT*mail2web*DOT*com

As for getting rid of the aforementioned (love using that word) text messages, hold the two soft keys down and poke the reset hole with your stylus. then after about 3 seconds release the buttons and press R on the slidey keyboard

Phil

[Tommy Squeaker]

The Doctor, on Feb 3 2007, 00:07, said:

You could just attach them to the post here, or my email is phil*DOT*martin*AT*mail2web*DOT*com

As for getting rid of the aforementioned (love using that word) text messages, hold the two soft keys down and poke the reset hole with your stylus. then after about 3 seconds release the buttons and press R on the slidey keyboard

Phil

Its ok, i took it apart again to send to an ebay seller, to see if they are the same screen, only thing is cant find the seller now dohhh

But the bit i didnt know what it was, i found out what it is, it clips into the rear case, near where you plug the battery in.

Thanks for ya help tho

[UndeadDevil]

Are the pictures ever coming? I'd love to see the insides of my MDA Vario II

[The Doctor]

UndeadDevil, on May 31 2007, 21:07, said:

Are the pictures ever coming? I'd love to see the insides of my MDA Vario II

I'll make a point of doing it tomorrow I'll add some annotations as well, stuff like Wi-Fi antenna, bluetooth antenna etc so its also a complete guide as to whats inside your hermes

Phil

[waroffice]

supprisingly easy to disassemble.

thanks

[haznick]

Hi all.

I just replaced my damaged screen with help from this thread. All was well and the screen worked fine.

Only problem is I can't get any service from my SIM card now. Everything on the phone works as it did before except I can't seem to get any signal from T-Mobile. The SIM card looks seated correctly and the pins look ok.

Is it possible I could have damaged the SIM pins or ariel during dis/re-assembly? The ariel's all enclosed in that big black thing so I'm not sure. The SIM is fine btw as I've checked it in another phone.

I did update my radio version a few weeks back, but that surely wouldn't make any difference would it? The phone doesn't revert to any previous settings or versions if the battery has been out for a while?

Any ideas or suggestions would be welcome.

Thanks, Nick.

[haznick]

Anyone?

[Mike Channon]

haznick, on Aug 19 2007, 15:57, said:

Anyone?

I think it unlikely it's the aerial connection, but you could just check the gold pin is seated in it's push in gold clip. Here it is inserted:






and here disconnected:





Mike

[Mike Channon]

Additional dismantling guides.

http://michael-channon.spaces.live.com

And here’s another pictorial guide (text in Russian but pics are clear):
http://www.pdacenter.ru/razborka/razbor_hermes/

Or here:
http://inuchanbt.blog54.fc2.com/blog-entry-100.html

or here:
http://www.howardforums.com/showpos...842&postcount=1



Mike

[dittie]

Mike Channon, on Sep 5 2007, 16:10, said:

Additional dismantling guides.

http://michael-channon.spaces.live.com

And here’s another pictorial guide (text in Russian but pics are clear):
http://www.pdacenter.ru/razborka/razbor_hermes/

Or here:
http://inuchanbt.blog54.fc2.com/blog-entry-100.html

or here:
http://www.howardforums.com/showpos...842&postcount=1



Mike

Hi Mike,

I managed to take my Hermes apart and replace my Touchscreen. When i detached the touchscreen I had to take this orange connectors off, they were held in place with see through tape. One for the touchscreen about 1 cm wide and another one (my guess is the backlight ?!). I did so and It think maybe a bit to rough/unhandy. I replaced the Touchscreen and tried to connect those orange connectors again with some tape. Put my whole phone together again. Now I do not have backlight anymore and my touchscreen is not working... I think some pieces of the connection of the orange connectors stayed on the phone and some on the connector itself so it cannot make contact anymore...

What is the way to reconnect those orange "connectors"? Maybe it needs soldering?

 herm2.JPG (63.21K)
Number of downloads: 65

On the picture you can see one of them.

[dittie]

Mike Channon, on Sep 5 2007, 16:10, said:

Additional dismantling guides.

http://michael-channon.spaces.live.com

And here’s another pictorial guide (text in Russian but pics are clear):
http://www.pdacenter.ru/razborka/razbor_hermes/

Or here:
http://inuchanbt.blog54.fc2.com/blog-entry-100.html

or here:
http://www.howardforums.com/showpos...842&postcount=1



Mike

Hi Mike,

I managed to take my Hermes apart and replace my Touchscreen. When i detached the touchscreen I had to take this orange connectors off, they were held in place with see through tape. One for the touchscreen about 1 cm wide and another one (my guess is the backlight ?!). I did so and It think maybe a bit to rough/unhandy. I replaced the Touchscreen and tried to connect those orange connectors again with some tape. Put my whole phone together again. Now I do not have backlight anymore and my touchscreen is not working... I think some pieces of the connection of the orange connectors stayed on the phone and some on the connector itself so it cannot make contact anymore...

What is the way to reconnect those orange "connectors"?

 herm2.JPG (63.21K)
Number of downloads: 65

On the picture you can see which connector I mean, there is another one next to that. The conntection you see on the picture is still fit, however the part where the tape was put is disconnected and I cant get it fixed I wonder how to fix it, maybe it needs soldering?

This post has been edited by dittie: 11 October 2007 - 08:45 AM

[Kippax]

Cheers for the guides...... most useful.

One question.... I have one component which I am unable to figure out the location of.



Its made from rubber and has a small slot in the right hand face as you look at the image that looks as though should accommodate some sort of lug. It also has the number "27" on it.

Anybody help ???

This post has been edited by Kippax: 24 October 2007 - 12:42 PM

[nicotine]

Kippax, on Oct 24 2007, 12:40, said:

Cheers for the guides...... most useful.

One question.... I have one component which I am unable to figure out the location of.



Its made from rubber and has a small slot in the right hand face as you look at the image that looks as though should accommodate some sort of lug. It also has the number "27" on it.

Anybody help ???

It's microphone rubber cap, you'll find rectangular componet with a hole in the midle of it. cap the rubber

[Sponsored Links]