[Paraklas]

Here are some..

1st is in dark with flash off

2nd is in daylight

3rd is in dark with flash on

 DSC_00001.jpg (206.76K)
Number of downloads: 179

 DSC_00002.jpg (273.43K)
Number of downloads: 186

 DSC_00005.jpg (241.87K)
Number of downloads: 160

The refresh rate of the camera has also been improved from ROM versions below 1.30 or 1.25

This post has been edited by Paraklas: 17 May 2005 - 02:01 PM

[Sponsored Links]

[frogger90]

Sweet! I wonder if this will fix the bluetooth problem I have been having with my BLNC ihf1000 handsfree device...

--I can partner the devices but as soon as I turn the car off and back on at a later time, they don't see each other. --The only fix I have found is to delete the partnership on the Phone side, turn on the car, then the ihf1000 tries to connect, thereby prompting a message on the phone to allow the connection.

Besides that one "glitch", everything else seems to work great! --Mostly


Any hope that this new ROM will allow voicedial through bluetooth?

[drizze99]

frogger90, on May 17 2005, 11:34, said:

Sweet! I wonder if this will fix the bluetooth problem I have been having with my BLNC ihf1000 handsfree device...

--I can partner the devices but as soon as I turn the car off and back on at a later time, they don't see each other. --The only fix I have found is to delete the partnership on the Phone side, turn on the car, then the ihf1000 tries to connect, thereby prompting a message on the phone to allow the connection.

Besides that one "glitch", everything else seems to work great! --Mostly
Any hope that this new ROM will allow voicedial through bluetooth?
<{POST_SNAPBACK}>

There have been Bluetooth improvements with the 1.39 ROM so it might help you out.

There will never be voice dial via BT because that is a WM2003SE problem. Motorola used the tags from Windows for voice commands and BT is not in the stack. The reason why the C500/5600 can do it is because the voice commands were done differently not using the WM2003SE stack.

[frogger90]

drizze99, on May 17 2005, 10:05, said:

There have been Bluetooth improvements with the 1.39 ROM so it might help you out.

There will never be voice dial via BT because that is a WM2003SE problem. Motorola used the tags from Windows for voice commands and BT is not in the stack. The reason why the C500/5600 can do it is because the voice commands were done differently not using the WM2003SE stack.
<{POST_SNAPBACK}>

Oh well.. at least I can program up to 20 names/numbers for verbal commands with the handsfree device. Seems to work well so far.. when paired. Can also verbally dial the digits. More importantly, I can hear the phone ring while on the road (stereo gets muted) and answer. =)

I'll find out later tonight if how the update affects things for the partnerships.

Thanks!

[jmun2098]

im sorry but im a little confused i currently have 1.30 rom. so what exactly should i do to get the new 1.39 rom from cingular? the reason im confused is because is this rom from motorola or cingular? cuz the motorola website says there is no update available??

[Paraklas]

Quote

im sorry but im a little confused i currently have 1.30 rom. so what exactly should i do to get the new 1.39 rom from cingular? the reason im confused is because is this rom from motorola or cingular? cuz the motorola website says there is no update available??

The update is from motorola for Cingular phones. Currently the tool is not available for download, but it seems that the new rom is available since I updated yesterday (i had the update tool already installed long before they remove it from their servers)

[ppcmd]

What is the upgrade tool file called it may be available at HoFo site?

[Paraklas]

Here is the Online update tool. It's called Motorola MPx220 System Update v1.0.0.28 and I have compressed it using Winrar (.rar) - 3MB download.

Enjoy!



 Motorola_MPx220_System_Update_v1.0.0.28.rar (3.01MB)
Number of downloads: 1026

[frogger90]

frogger90, on May 17 2005, 10:36, said:

Oh well.. at least I can program up to 20 names/numbers for verbal commands with the handsfree device. Seems to work well so far.. when paired. Can also verbally dial the digits. More importantly, I can hear the phone ring while on the road (stereo gets muted) and answer. =)

I'll find out later tonight if how the update affects things for the partnerships.

Thanks!
<{POST_SNAPBACK}>

Installed the AT&T firmware 1.390.0.0 last night and found that I still have the bluetooth problem of not being able to reuse the existing profile to have the handsfree automatically reconnect when the cars ignition is turned on... oh well. Does anybody else have this problem, or is it just me?

[Seth Cold]

frogger90, on May 18 2005, 14:06, said:

Installed the AT&T firmware 1.390.0.0 last night and found that I still have the bluetooth problem of not being able to reuse the existing profile to have the handsfree automatically reconnect when the cars ignition is turned on... oh well. Does anybody else have this problem, or is it just me?
<{POST_SNAPBACK}>

use cingular's 1.39... it's got the BT serial port setup on... maybe that'll solve ur problem

[domer]

I've got 1.30 and I ran the update tool and it said I have the latest. Is there some trick to get 1.39 to install?

Thanks!
Tom

Seth Cold, on May 18 2005, 15:00, said:

use cingular's 1.39... it's got the BT serial port setup on... maybe that'll solve ur problem
<{POST_SNAPBACK}>

[frogger90]

domer, on May 18 2005, 10:55, said:

I've got 1.30 and I ran the update tool and it said I have the latest.  Is there some trick to get 1.39 to install?

Thanks!
Tom
<{POST_SNAPBACK}>

Yeah, you will need to trick the update utility after it scans your phone, but before it checks online for updated firmware. --Thanks to those who figured this out on all the previous posts I have read on here. =)

Use the attached Cingular systemInfo.xml and drop it into C:\Documents and Settings\%username%\Local Settings\Temp\MPx220 System Update Wizard\* directory when you are prompted that it will now check for the update online.

--The actual temp directory may vary depending on OS and settings, but this works for me. -- Good luck!

Attached File(s)

•  systeminfo.xml (2.49K)
  Number of downloads: 443

[jmun2098]

frogger90, on May 18 2005, 10:07, said:

Yeah, you will need to trick the update utility after it scans your phone, but before it checks online for updated firmware. --Thanks to those who figured this out on all the previous posts I have read on here. =)

Use the attached Cingular systemInfo.xml and drop it into C:\Documents and Settings\%username%\Local Settings\Temp\MPx220 System Update Wizard\* directory when you are prompted that it will now check for the update online.

--The actual temp directory may vary depending on OS and settings, but this works for me. -- Good luck!
<{POST_SNAPBACK}>

i saved the systeminfo.xml file on my desktop and i ran the update but when and where exactly should i drop the systeminfo.xml file? im doing this becuase i have 1.30 and it says i dont have any updates available

[Paraklas]

Get this systeminfo.xml I'm posting (It's from Cingular 0.325 firmware).

1. Run Motorola Mpx220 System update utility

2. When it finishes "Getting Device Information" DO NOT press next until you replace the generated systeminfo.xml in the ...\Local Settings\Temp\MPx220 System Update Wizard\ with the one you got from here. After you overwrite it, press next. It should then find that you need the update.

This process will allow any mpx220 to update from any non-cingular firmware as well.

 systeminfo.xml (2.49K)
Number of downloads: 322

[jmun2098]

i figured out how to do it but it didnt work ....i just dropped the xml file in the folder where you specified and still said i didnt need update so i dont know what else to do...so i did the exact steps and i know i did it right but still said no udpate

This post has been edited by jmun2098: 18 May 2005 - 10:37 PM

[Paraklas]

C:\Documents and Settings\%username%\Local Settings\Temp\MPx220 System Update Wizard\


Find this directory on the computer on which you are running the update utility. In there, place the systeminfo.xml and overwrite the existing one. If you can't find the directory on your computer, search for the file!

When to do that? I said that on the previous post.

[jmun2098]

Paraklas, on May 18 2005, 14:31, said:

C:\Documents and Settings\%username%\Local Settings\Temp\MPx220 System Update Wizard\
Find this directory on the computer on which you are running the update utility. In there, place the systeminfo.xml and overwrite the existing one. If you can't find the directory on your computer, search for the file!

When to do that? I said that on the previous post.
<{POST_SNAPBACK}>

yeah i figured it out with exact steps i replaced the systemxml with the new one and didnt work so i dont know what else to do

[ezequielusa]

Paraklas, on May 18 2005, 03:08, said:

Here is the Online update tool. It's called Motorola MPx220 System Update v1.0.0.28 and I have compressed it using Winrar (.rar) - 3MB download.

Enjoy!
attachment
<{POST_SNAPBACK}>

I Download the file bat the RAR is empty

[frogger90]

Seth Cold, on May 18 2005, 08:00, said:

use cingular's 1.39... it's got the BT serial port setup on... maybe that'll solve ur problem
<{POST_SNAPBACK}>

Just installed the Cingular 1.39 rom and still having the same problem... Bluetooth interacts fine with my desktop, but for some reason will not reconnect with the bluetooth car kit after initial pairing. I called moto tech support and spend about 30 minutes on the phone before being disconnected. I'll try calling again tomorrow from work as I was on my mpx220. Odd that I got disconnected after being on the call for 31.31 minutes after the firmware update.... hope this isn't another bug.

[intelonetwo]

But where do you get the firmware? I have downloaded the utility, and the xml file, but the update still says that I have the latest version of firmware 1.30. What now?

frogger90, on May 18 2005, 11:07, said:

Yeah, you will need to trick the update utility after it scans your phone, but before it checks online for updated firmware. --Thanks to those who figured this out on all the previous posts I have read on here. =)

Use the attached Cingular systemInfo.xml and drop it into C:\Documents and Settings\%username%\Local Settings\Temp\MPx220 System Update Wizard\* directory when you are prompted that it will now check for the update online.

--The actual temp directory may vary depending on OS and settings, but this works for me. -- Good luck!
<{POST_SNAPBACK}>

[Sponsored Links]